Manufacturing

With the manufacturing industry being under the squeeze from international competition, the dollar needs to stretch just that little bit further. Lube Control offers a variety of lubricants that will save labour costs, lower the friction in rotating components and lower downtime of machinery.

Addinol High performance Ecogear M range (68, 100, 150, 220, 320, 460 and 680)

New technology high power gearbox oils containing Surftec®. For use in important and critical gearboxes where load, high temperatures, pittings and grey staining are observed. Oil drain intervals can be extended for up to 50,000 operating hours.

Addinol High performance Ecogear S range (68, 100, 150, 220, 320, 460 and 680)

New technology high power synthetic gearbox oils containing Surftec®. For use in important and critical gearboxes where load, high temperatures, pittings, grey staining are observed. Oil drain intervals can be extended up to 50,000 operating hours.

Poly Gear PG range (68, 100, 150, 220, 320, 460 and 680)

Fully synthetic oils (polyglycol) for the lubrication of bearings and industrial gears, for the application in sliding and rolling bearings and heavy loaded industrial gears. Particularly suitable for high temperatures, improve ageing stability, wear protection properties, corrosion protection and foam behaviour.

Fuchs Renep CLP range (68, 100, 150, 220, 320, 460 and 680)

Mineral gearbox and lubricating oils with Sulphur Phosphor as extreme pressure additives.

Addinol Chain lube XHT range Aerosols and bulk (50, 250 and 3000)

Fully synthetic chain oils, based on synthetic esters, extreme thermal oxidative stability. Can be used as a wire rope lubricant. Operating range between -20ºC +250 ºC.

Addinol Longlife HP 2

High load carrying Lithium/calcium soap greases based on mineral oil for long term applications. Excellent for extreme loads and severe environmental influences such as water and dust. Temperature range -30ºC to +130ºC.

Addinol High temp XFT 2

High temperature grease based on synthetic oils, suitable for drying kilns, hot blast blowers, manipulators and conveyors. Temperature range from -30ºC to +180ºC.

Addinol Premium PTFE 1/2

PTFE greases based on synthetic oil basis for heavy loads and extreme high temperature operating conditions. Highly resistant to aggressive chemicals. Operating temperature range -20 to +280ºC.

Addinol Flow grease SGR 00

High performance multipurpose "self levelling" flow grease based on mineral oil, for industrial gears and lubrication systems from -30ºC up to +100ºC.

Fuchs Renolit EP 2

General purpose Lithium soap greases based on mineral oil. Ideal for rolling and sliding bearings under normal to medium service conditions. Temperature range from -30ºC to +120ºC.

Addinol Adhesive Lubricant OG 0

Open gear aluminium soap grease based on mineral oil, EP-alloyed. Ideal for large open gears commonly found in cement and mining mills. Can be sprayed. Temperature range from -25 to +180ºC.

Fuchs Heat Transfer Oil B

Heat transfer oil.

Fuchs Renolin B HVI (ISO 32, 46, 68 and 100)

Hydraulic oils with a high viscosity index suited for all application from low to high temperature environments. Suitable for all hydraulic applications including earthmoving, industrial, agricultural and mining applications.

Inox MX 3 - penetrene aerosol and bulk

Thin multipurpose high quality penetrene. Has superior penetration, moderate lubrication properties and excellent corrosion protection (for superior lubrication and food grade use Inox MX 5)

Inox MX 5 with Teflon- penetrene aerosol and bulk

Thin multipurpose food grade high quality penetrene containing PTFE. Has superior penetration, extreme pressure lubrication and excellent corrosion protection.

Fuchs Renolin ZAF 22

Light airline lubricant suitable for all airline systems. No harm when in contact with silver.

Addinol Anti seize Paste 23 White

Light multipurpose assembly paste based on mineral oil. Ideal for heavily loaded sliding and hinge bearings, spindles and guides. Temperature range from -60ºC to +250ºC.